Baby and Toddler Leg Warmers

If you are like me, changing diapers all day and/or taking your toddler to the potty several times a day, you probably feel like all you do is dress and undress your children. In the summer, this isn't too bad because I'll have my daughter run around in a dress and my baby in a onesie, but it is too cold to leave their legs bare in the winter. Putting leg warmers on babies/toddlers is the perfect solution! I've decided that it is time for me to try my hand at making baby leg warmers. Here it goes!

Materials:

Adult Knee High Socks

Scissors

Ruler (or just estimate)

Coordinating Thread

Sewing Machine

Lay out your knee high socks onto a flat surface. 

Note: You don't need a rotary mat for this project, I just tend to always use it when I am crafting.

 Make a cut right above the heel. This will detach the foot of the sock.

With the foot of the sock, cut off the heel and the toe section. This will leave about a 4 inch section.

 Fold the 4 inch foot section inside itself to where the ends are together. 

Flip this piece inside out to where the wrong side is facing out.

 Align the folded foot section with the cut off end of the leg section to where all of the ends are together.

 The ends tend to roll so you will have to do your best to keep them flat.

Using your sewing machine, sew the leg section and folded foot section together. 

I followed the line between the black and yellow stripes to ensure a straight stitch.

Remember to back stitch at the beginning and end.

 Remove from the sewing machine and cut off the excess material.

Pull down on the smaller piece which will turn it right side out again.

 You finished one leg warmer, now complete the other one the exact same way.

   All finished! That wasn't too difficult. 

Now for my little princess to try them on...

Voila!!!
 I'd say they turned out pretty darn cute!
Now if I can only find some boyish knee high socks to make a pair for my son...

Happy Crafting!

"Believe" Christmas Pillow

Sometimes a single word can speak volumes.


BELIEVE


Believe.....in the joy
Believe.....in the spirit
Believe.....in the true meaning 
Of Christmas

Believe in Christmas this year.
In a previous post, I walked you through how to make a personalized name pillow.
You can can make personalized name pillows for every
name, holiday, and special occasion.

Here is the pillow that I made with my mom for Christmas this year. 

Check out the tutorial for step by step instructions on how to make a personalized pillow.

Here are some notes about making this particular pillow:

• Use a variety of Christmas fabrics that coordinate well together. 
• Use a mix of busier prints as well as simpler prints.
• The use of multiple fonts within one word gives it a more modern look.
• The Star was made from yellow scrap fabric and adds a nice pop to the pillow.
• The presents with the ribbon were a last minute idea which gives a nice 3D touch.
• In hindsight, I would add trim to the outside of the white background to frame up the word a little better.
• If you have any questions, just ask!

Happy Crafting!

Personalized Name Pillows

Every child deserves to have a special pillow with their name on it. I have made personalized name pillows over the last few years as gifts for my favorite kiddos. The kids seem to enjoy the the pillows and I love making them.  Follow these simple steps and you too can make a personalized name pillow for each of the special kiddos in your life.

This post will explain how I made this exact pillow and will also include suggested adjustments for you to make your own unique pillow.

Materials Needed:
Cricut Cutting Machine and accessories (or another means to make traceable letters)
Heat N Bond iron-on adhesive
Rotary Mat
Sewing Ruler
Rotary Cutter
Pencil
About 1-1.5 yard of assorted fabric ( I used 1/8 of green print, yellow print, orange print, and pink print; 1/2 yard of flower print, and 1/4 yard white print)
Coordinating thread
Buttons
Sewing Machine
Iron
Cloth (for ironing)
Sewing Needle

Directions:
Step 1: Traceable Letters
Using a Cricut cutting machine, cut out 5" letters (or larger/smaller). I used the Cutting Up cartridge for the letters and also cut out 3" flowers from the Accent Essentials cartridge. These paper letters/flowers will be used as stencils. You can also make letter stencils by printing out a font from the computer on card stock. There are a TON of free fonts out there. 

Here are the letters that I cut out from scrap paper.

Place each letter backwards onto the paper side of the Heat N Bond iron-on adhesive.  

Trace the letters with a pencil.

Cut the paper surrounding the outside of each letter (not cutting the actual letters out yet).

Step 2: Iron-on Letters
Place the iron-on letter cutouts on top of chosen fabrics. Make sure the adhesive side is facing the wrong-side of the fabric.Using a medium heat, press the iron to the Heat N Bond paper bonding the adhesive to the fabric (3-4 seconds). Let cool. Cut out letters following the pencil lines. Peel off paper leaving a shiny side to the back of the fabric.

Here is what the letters look like after being cut out. 

Step 3: Background Fabric
Cut out fabric for the background. I used a 10" X 22" piece of fabric to make sure it was going to be large enough. You can always cut it down to size later. Adjust the fabric's width and length (larger/smaller) according your font size, number of letters, and embellishments.

Step 4: Fabric Letters
Arrange letters and flowers on the background fabric. Cover with cloth (to prevent marks) and iron with medium-high heat (6-8 seconds). Let cool. Cut background fabric to size. I recommend 1-2" border around the letters. Iron 1/4" seam around the background fabric.

Step 5: Stitch Letter Borders
Set your sewing machine to a short, narrow zig-zag stitch. For length, I use halfway between 0 and 1, and between 3 and 4 for width. Practice a few stitches on scrap fabric to decide what works best for you. Using coordinating thread, stitch a border around each letter. I'm sure this seems like it would be super tricky, but once you practice it, it really isn't that difficult. Remember to back-stitch at the beginning and end of each letter. Trim off all extra threads.

 Make sure the zig-zag covers the border of the letter.

Step 6: Fabric Strips
Cut pieces of assorted fabric into strips that are 2 1/2" wide (or larger/smaller) and varied lengths. Arrange strips into four rows (one for each side of pillow) and sew right-side ends together. This should make 4 patchwork-like fabric strips.

 Step 7: Patchwork Border 
Line up one fabric strip to a corner of the background fabric and pin the right sides together along the entire border of the background fabric. Attach the border by sewing a 1/4" seam around the outside (follow the seam line that was ironed around the fabric already). Unpin the fabric and repeat this step for each side of the background fabric.

  Measure the border on each side to make sure it is even and trim the material if necessary. Cover with cloth and iron on medium-high heat. For added cuteness, I sewed a couple buttons to the middle of the flowers.

Step 8: Pillow Back
Lay the front pillow piece on top of material for the back of the pillow. Cut the back fabric to size. With right sides of fabric facing each other, sew front and back fabrics together. Leave a 4-5 inch gap not sewn and flip fabric right-side out.

Step 9: Stuff and Stitch
Fill pillow with batting/stuffing until you have reached desired fluffiness. Using a whip stitch, sew up the remainder of the pillow. You're finished!

*One of the fun things about making Name Pillows is that there are so many ways to change things up so that each pillow can be unique and look completely different from the last one.

Here are a few other name pillows that I have made.

Happy Crafting!